Pacplast Thermoform GmbH

With our thermoforming and deep-drawing foils for applications such as blisters, trays, etc. we guarantee a good workability on all common thermo- and coldforming systems, as well as the best protection and high transparency for an attractive presentation of your products.

All thermoforming foils can be unstacked easily and bring good sealing and bonding properties. Our foils are also available as recycle material, which make your packaging material more sustainable - a topic that becoming more and more important.

Advantages:

• attractive product presentation
• Product protection from dirt, flavours, oxygen and steam
• easy dosing for consumer

Triplex

• SBC up to 240g/m² high barrier
• PVC/PE/PVDC
• PVC/PE/PCTFE (Aclar®)
• PP/COC/PP
• PET G/COC/PET G
• PET G/PE-EVOH-PE/PCTFE (Aclar®)
• OPA/ALU/PVC, OPA/ALU/PE

Duplex

• PET/PE
• PVC/PE
• PVC/PVDC 40g/m² / 60g/m² / 90g/m² / 120g/m²
• PVC/PCTFE (Aclar®)
• PET G/PCTFE (Aclar®)

Mono

• BIO-PET
• PET (= Polyester, A-PET, R-PET, A-B-A quality, PET G, PET GAG, O-PET)
• PP (Polypropylen)
• PLA (Polylactic acid), biocompatible
• PC (Polycarbonat)
• TPE (increased temperature resistance)
• PVC (Polyvinyl choride)
• BIO-PET

Aluminum capsules are the ideal packaging for your coffee product in terms of appearance, dosage and durability.
Aluminum capsules provide you with state-of-the-art solutions that can protect your product against the damaging effects of oxygen, sunlight and moisture without compromising taste or quality.
Characteristics:

• excellent barrier properties against light, oxygen and moisture
• unembossed or with desired embossing
• different colors

BIO-PET is a thermoplastic film consisting of 70% PTA (terephthalic acid) and 30% BIO-MEG (monoethylene glycol).
The basis for the BIO-MEG is ethanol, which is obtained during the fermentation of sugarcane juice or molasses (a waste product of sugar refining).
From a chemical point of view, there are no differences between conventional, petroleum-based PET and BIO-PET. Also, the processing is not affected by the biologically based fraction in PET.
BIO-PET is as recyclable as conventional PET without compromising the properties of the recycled material. This makes the material suitable, especially for short-lived products.
Characteristics:

• printable with all common printing processes (screen-, offset- and digital print)
• thermoformable
• sealable
• weldable

Advantages:

• less use of fossil resources
• Based on renewable raw materials
• lower CO2 emissions compared to 100% petrochemical plastics
• Price advantage compared to other bio-based plastics
• Reprocessing with recycling
• Reduction of dependence on crude oil price volatility

Applications:

• Packaging
• Blister
• Trays
• Displays
• Cards

The new super-barrier coated (SBC) thermoformable film Flexapharm® SBC 240 for pharmaceutical blister packaging enables companies to protect and present their products even more efficiently.
Due to the barrier properties of the film composite, it is possible to use smaller blister cards or to increase the number of tablets of your previously used blister card.
The end result is material cost savings through the packaging process, including cartons and boxes, as well as improved production efficiency.
This film composite is produced by Tekni-Films (Wayne, PA)

SBC 240's triplex structure is being used as a more powerful and cost-effective alternative for 4- and 6-mil polychlorotrifluoroethylene (PCTFE) and cold-formed films in thermoformable blister applications, and is suitable for applications such as pharmaceuticals, nutraceuticals, probiotics, and related products.

In addition to the extremely high moisture and oxygen barrier properties, SBC 240 also has a wider temperature processing window than PCTFE.

The material is produced by applying a high barrier polyvinylidene chloride (PVdC) coating to a polyethylene based film structure. Multiple layers can be used to create different coating thicknesses. As the coating weight increases, so does the barrier properties.

The Flexapharm® SBC film can be produced in layer thicknesses of 120, 150, 180 and 210 grams, as well as other custom solutions.

Advantages:

• excellent barrier properties against oxygen and water vapor
• higher temperature window during processing than comparable PCTFE blister foils
• More powerful and less expensive alternative to 4-6 mil PCTFE film composites
• Product efficiency increase through material savings

The Tekniflex® COC PnP is a COC film coextruded with polypropylene for thermoformable blister foils that provide a high barrier to moisture.
Ideally suited for pharmaceutical dosage forms of small, medium and larger size.

If you also need a high barrier to oxygen, the PP / COC / PP film can also be produced with a barrier layer made of EVOH. The Tekniflex® ECO PnP is a state-of-the-art film composite ideally suited to present your sensitive pharmaceutical products attractively and protectively.

Advantages:

• PVC free
• producible in different strengths (250µ - 457µ)
• excellent steam and oxygen barrier